UCF208-24T BLT

The TRITAN Premere-Loc UC series insert bearings are double-sealed deep-groove ball bearings made of through-hardened chromium steel and are appropriate for applications with moderate radial loads and light thrust or combination loads. They have a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in the outer surface that prevents the bearing from free spinning within the housing and ensures smooth performance. ~~ Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. The bearing locks onto the shaft with a concentric collar that is tightened and compresses the spline zone of the bearing inner ring to grip or squeeze the shaft. The concentric locking collar provides a uniform grip to the inner ring, leading to an operational true centerline, reducing vibration at higher speeds. As well, the concentric locking force significantly reduces the chance of damaging the shaft. This allows for easy one-step installation and are ideal for bi-directional applications and can replace both setscrew locking and eccentric collar locking bearings. ~~ TRITAN Insert bearings arrive fully lubricated and ready for use, but can also be re-lubricated as needed. Their design includes a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication while in an appropriate housing. ~~ These Insert bearings are designed for use in pillow block or flange units, made to AFBMA standards, interchangeable, and can be used in housings produced by most manufacturers. Ball Bearing mounted units using these inserts are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others. ~~ TRITAN manufactures high quality bearings and power transmission components such as roller chain, sprockets, bushings & pulleys (sheaves) in ISO certified factories that comply with AFMBA, ISO & ANSI standards for quality assurance.