SB207-35MMG BLT

Insert Bearing, Light Duty, Set Screw, Relubricable, 35mm ID, 72mm OD, 32mm Inner Ring Width
Manufacturer: Bearings Limited
Manufacturer part number: SB207-35MMG
Availability: Expected Leadtime 10 days
Estimated dates are contingent upon manufacturer stock.
CBT - CINCINNATI CBT - SPRINGBORO CBT - SIDNEY
0 0 0
CBT - LEXINGTON CBT - LOUISVILLE
0 0
Loading...
Price on Request

Product Details

Brand Name

TRITAN

Description

The TRITAN SB series insert bearings are double-sealed deep-groove ball bearings made of through-hardened chromium steel and are appropriate for applications with moderate radial loads and light thrust or combination loads. The bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. ~~ Steel-reinforced molded rubber lip seals on both sides of the bearing retain the high quality multi-purpose lubricant and prevent contaminants from entering the raceway. The bearing locks onto the shaft with two cup point setscrews spaced 120 degrees apart for a three-point contact hold. The area around the set screw is specially annealed to prevent cracking when set screws are tightened. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. ~~ TRITAN insert bearings arrive fully lubricated and ready for use. SB inserts with the G suffix can also can be re- lubricated as needed. ~~ These insert bearings are designed for use in pillow block or flange units, made to AFBMA standards, are interchangeable, and can be used in housings produced by most manufacturers. Ball Bearing mounted units using these inserts are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others. ~~ TRITAN manufactures high quality bearings and power transmission components such as roller chain, sprockets, bushings & pulleys (sheaves) in ISO certified factories that comply with AFMBA, ISO & ANSI standards for quality assurance.

Features

Narrow Inner Ring. Dual Type Seals. Pre-Lubricated with quality NLGI2 Bearing Grease. Lubrication Groove and hole on Collar Side

Specifications

Bore Diameter (d):35mm
Cage Material:Pressed Steel
Inner Ring Width (B):32mm
Limiting Speed (RPM):4300
Material:52100 Steel
Operating Temperature Range:-4 to +248 °F
Outside Diameter (D):72mm
Seal / Shield Type:Full Cover Metal Shroud Seals
Weight (Lbs):0.924
Product Tags