IR-1616 KOY

Name: IR-1616 KOY
Brand: Koyo Bearings
SKU: IR-1616 KOY
Availability: OutOfStock

Actual Product May Vary From Image

Product Details

Manufacturer:

Koyo Bearings

Manufacturer part number:

IR-1616

product.name:

IR-1616 KOY

CBT Inventory

Vendor Inventory

Availability:

Ships in 3-5 days.

Estimated dates are contingent upon manufacturer stock.

Price on Request

Description

Brand Name

Koyo

Type

Regular Width

Description

Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.

Koyo Inner Ring, Regular Width, Series: IR Inch Series, 1 in ID, 1-1/4 in OD, 1.015 in Overall Width, For Use With: B-2016, BH-2016, J-2016, JH-2016, M-20161, MH-20161, MJ-20161 Drawn Cup Needle Roller Bearing, Steel, Polished Chrome

Features

Ideal choice when shaft is not practical to use as inner raceway
Designed to meet established inch tolerances
Designed to be wider than matching drawn cup bearing
Maximum shaft fillet radius cannot exceed inner ring bore chamfer
Designed to provide a loose transition fit on the shaft and should be axially clamped against a shoulder
If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD must not exceed the raceway diameter for the matching drawn cup bearing after being mounted on the shaft
After mounting, if OD of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted to shaft

Specifications

Finish:	Polished Chrome
Inside Diameter:	1 in
Material:	Steel
Outside Diameter:	1-1/4 in
Overall Width:	1.015 in
Series:	IR Inch Series
Suitable For Use With:	B-2016, BH-2016, J-2016, JH-2016, M-20161, MH-20161, MJ-20161 Drawn Cup Needle Roller Bearing